| Customization: | Available |
|---|---|
| After-sales Service: | Online Technical Support |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Characteristics:
1 Machine tool head box and bed, tailstock, Supporting plate, etc. the combination of surface between manual scraping, machine to undergo a rigorous inspection, effectively ensure the machine tool accuracy and stability.
2 Machine adopts high strength cast iron, copper and chromium special materials are added, the bed width 400mm, bed rail quenching depth up to 4mm, effectively improves the abradability and stability of the machine.
3 The machine tool bed head box lubrication uses the pump to carry on the circulation forced lubrication, in view of the south hot weather, has guaranteed the bed head box cleanliness and the heat radiation characteristic, has effectively extended the bearing and gear's service life.
4 Wafangdian Bearing is used in machine tool spindle, the spindle through hole diameter 80mm, machine tool gear with precision grinding, can effectively improve the hardness of the gears, to reduce noise of the machine.
5 Machine tool uses the domestic brand lead screw, the silk mother uses the high quality bronze alloy to guarantee the wear-resisting property and the precision maintenance.
6 The machine adopts high strength four station turret shank size: 25x25mm.
Application:
1 CA series ordinary horizontal lathe is used to turning internal and external cylindrical surface, conical surface, and other rotating surface, turning various metric and inch, modulus and pitch thread, and the pitch diameter of the thread and pull the drilling and oil tank etc., is general very strong horizontal lathe, Widely applicable batch processing of various shaft and disc parts.
2 The series lathe bed width in general lathe, 400mm rail width has higher stiffness, rail surface by intermediate frequency quenching, wear-resistant durable.
3 Handy machine operator concentration, slide plate is provided with a quick moving mechanism. Using single handle operation, humanization.
4 The rigidity of the machine tool structure and the transmission stiffness are higher than the general lathe, the power utilization rate is high, which is suitable for the strong cutting.
5 Before leaving the machine tool factory, the machine tool is tested strictly according to the inspection procedure, and the machine tool is tested to ensure that the machine tool has good stability and reliability.
Main technical specifications:
| Specifications | CA6180 CA6180B CA6180C | CA6280 CA6280B CA6280C | ||
| Max. Swing over bed | 800mm | |||
| Max. Swing over carriage | 540mm | |||
| Max. swing in gap | -- | 1020mm | ||
| Effective gap length | -- | 210mm | ||
| Max. length of work piece | 750mm/1000mm/1500mm/2000mm/2200mm/3000mm/4000mm | |||
| Width of bed | 400mm | |||
| Section of turning tool | 25x25mm | |||
| Spindle | Spindle speeds | 10-1400rpm/16-1400rpm (24steps) | ||
| Hole through spindle | 52mm. (80mm). [105mm] | |||
| Spindle taper | NO.6(MT6)(Φ90 1:20)[Φ113 1:20] | |||
| Feed | Number of feeds | 64 kinds(for each) | ||
| Range of metric threads(kinds) | (1-192mm)44kinds | |||
| Range of inch threads(kinds) | (2-24tpi)21kinds | |||
| Range of module threads(kinds) | (0.25-48)Moduie39kinds | |||
| Range of pitch threads(kinds) | 1-96DP(37kinds) | |||
| Tailstock | Max. tail stock spindle travel | 150mm | ||
| Tail stock spindle diameter | 75mm | |||
| Taper of tail stock spindle center hole | NO.5(MT5) | |||
| Main motor | 7.5KW(10HP) | |||
| Packing dimensions (L*W*Hmm) | Overall dimensions for750mm | 2550x1140x1750 | ||
| Overall dimensions for1000mm | 2700x1140x1750 | |||
| Overall dimensions for1500mm | 3200x1140x1750 | |||
| Overall dimensions for2000mm | 3700x1140x1750 | |||
| Overall dimensions for2200mm | 4030x1140x1750 | |||
| Overall dimensions for3000mm | 4850x1140x1750 | |||
| Overall dimensions for4000mm | 5800x1140x1750 | |||
| Weight (kg) | Length | G.W N.W. | ||
| Weight for 750mm | 2520 2400 | |||
| Weight for 1000mm | 2720 2560 | |||
| Weight for 1500mm | 2980 2800 | |||
| Weight for 2000mm | 3260 3087 | |||
| Weight for 2200mm | 3490 3287 | |||
| Weight for 3000mm | 4200 3887 | |||
| Weight for 4000mm | 4850 4500 | |||
1: Where is your company
A: Our company is located in Tengzhou City, Shandong Province.
2: What about your warranty?
A: Warranty is one year. During warranty time, if the parts are damaged because of Nonhuman factors, we will send new replaced parts for free
3: How do you offer after-sale service?
A: We usually offer technical support online by wechat or whatsapp. Customer describe the problems and send videos and pictures, our technician will help to solve the problems
4. What is your standard package?
A: Our package is export standard plywood case with pallet.
5: What's the Payment Terms?
A: T/T, 30% initial payment when order, 70% balance payment before shipment;
6: What's the MOQ?
A: 1 set.
){kind=link}