Advanced Automatic 50 Ton Dual Speed Hydraulic Shop Press with Gauge for Car Repairs and Maintenance in Automotive Workshops

Product Description

The Y32 four column hydraulic press adopts a three beam four column structure, with a hydraulic system using plug-in valve oil circuits and an electrical system using relays or PLC control circuits. It has adjustable and semi-automatic operation modes. The overall structure is simple, compact, economically reasonable, reliable in action, long in service life, and has minimal hydraulic impact, reducing connecting pipelines and leaks. The working pressure, pressing speed, and stroke range can be adjusted within the specified range according to the process requirements, achieving both constant pressure and constant range processes. In the case of constant pressure forming, there is a delay in holding pressure and an automatic return stroke after pressing. The workbench is equipped with an ejector device in the middle, which can not only eject products, but also serve as a hydraulic pad for the forming process of drawn parts.

The Y41 single column hydraulic press is a "C" type single column structure, using all steel welded bodies. The hydraulic system is arranged inside the machine body, and the lower part of the workbench is equipped with hydraulic pads. The working pressure stroke can be adjusted within the specified range. The electrical control system is based on a "PC" programmable controller. The machine is centrally controlled by buttons and can be adjusted for manual or semi-automatic operation. This series of hydraulic presses is suitable for stretching, stamping, bending, flanging, correcting, pressing, cold and hot extrusion of metal materials, as well as for pressing and forming powder and plastic products.

 

The four column single action hydraulic press used for sheet metal deep drawing adopts reverse stretching technology, and the hydraulic pad can be installed inside or outside the workbench. The hydraulic system adopts plug-in valves, and the electrical system is automatically controlled by PLC. It has point action and semi-automatic operation functions, and the stroke, pressure, and speed of each moving part are independently adjustable within a certain range to meet the needs of metal product forming parts. It can also be equipped with a striker, mobile station, punching buffer device, grating safety protection device, and human-machine interface according to user needs.

This product is suitable for automotive shock absorber assemblies, precision bearings, bushings, automotive parts, water pumps, turbochargers, transmissions, gears, automotive chassis parts, rear axles, subframe bushings, etc. During the product pressing process, the current pressing position and force are displayed in real time, and the interference amount is accurately determined in a timely manner. At the same time, the pressure fitting curve of the entire force and displacement is displayed, which effectively solves the problem that traditional presses can only press without detection, and the testing machine has low efficiency and cannot be mass-produced. The overall structure of the equipment has been strengthened, with stiffness far exceeding the standard of ordinary presses, and an overall dust-proof design has been adopted.

 

This product is suitable for embossed patterns on various iron sheets, stainless steel doors, large automotive parts, and other products. During the product pressing process, real-time display of the current pressing position and pressing force, and timely and accurate judgment of whether the interference amount is appropriate. At the same time, the pressure fitting curve of the entire force and displacement is displayed, which effectively solves the problem that traditional presses can only press without detection, and the testing machine has low efficiency and cannot be mass-produced. The overall structure of the equipment has been strengthened, with stiffness far exceeding the standard of ordinary presses, and an overall dust-proof design has been adopted.

Product Description

Characteristics
HP-M series Movable cylinder presses is improved based on traditional two-column hydraulic press machine. The hydraulic cylinder could move freely on frame, so enlarged the working space, It takes the advantages of convenient and quick operation.
Application:
The machine is suitable for operating in the open air or the other special situation.
Main technical specifications:

Specification	unit	HP-200M
Capacity	KN	2000
Pressure	MPA	31.5
Travel	mm	300+405
Table size	mm	500x1000
Dimension	mm	1940x950x2350
		900x800x1060
Weight	Kg	2200

Company Profile

Certifications

FAQ

1: Where is your company 
A: Our company is located in Tengzhou City, Shandong Province.

2: What about your warranty?
A: Warranty is one year. During warranty time, if the parts are damaged because of Nonhuman factors, we will send new replaced parts for free

3: How do you offer after-sale service?
A: We usually offer technical support online by wechat or whatsapp. Customer describe the problems and send videos and pictures, our technician will help to solve the problems

4. What is your standard package? 
A: Our package is export standard plywood case with pallet.

5: What's the Payment Terms? 
A: T/T, 30% initial payment when order, 70% balance payment before shipment; 

6: What's the MOQ? 
A: 1 set.